Harbor Freight Tools Variable Speed Multifunction Air Tool Manual descargar pdf (Pagina 13)

Page 13For technical questions, please call 1-800-444-3353.SKU 67538

Troubleshooting

Problem Possible Causes Likely Solutions

Decreased output. Not enough air pressure and/1.

or air ow.

Obstructed Lever. 2.

Incorrect lubrication or not 3.

enough lubrication.

Dull or damaged accessory.4.

Blocked Air Inlet (27) screen.5.

Air leaking from loose housing. 6.

Mechanism contaminated. 7.

Check for loose connections and make sure 1.

that air supply is providing enough air ow

(CFM) at required pressure (PSI) to the

tool’s air inlet. Do not exceed maximum air

pressure.

Clean around Lever to ensure free 2.

movement.

Lubricate using air tool oil according to 3.

directions.

Replace accessory.4.

Clean air inlet screen of buildup.5.

Make sure housing is properly assembled 6.

and tight.

Have qualied technician clean and lubricate 7.

mechanism. Install in-line lter in air supply

as stated in Initial Set Up: Air Supply.

Housing heats

during use.

Incorrect lubrication or not 1.

enough lubrication.

Worn parts.2.

Lubricate using air tool oil according to 1.

directions.

Have qualied technician inspect internal 2.

mechanism and replace parts as needed.

Severe air

leakage.

(Slight air leakage

is normal,

especially on older

tools.)

Cross-threaded housing 1.

components.

Loose housing. 2.

Damaged valve or housing.3.

Dirty, worn or damaged valve. 4.

Check for incorrect alignment and uneven 1.

gaps. If cross-threaded, disassemble and

replace damaged parts before use.

Tighten housing assembly. If housing cannot 2.

tighten properly, internal parts may be

misaligned.

Replace damaged components.3.

Clean or replace valve assembly.4.

Follow all safety precautions whenever diagnosing or servicing the

tool. Disconnect air supply before service.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY

DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR

DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT

HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS

QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/

OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD

BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE

BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE

ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER

INSTALLATION OF REPLACEMENT PARTS THERETO.

1 2 ... 8 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios

Harbor Freight Tools Variable Speed Multifunction Air Tool Manual Pagina 13

Comentarios a estos manuales

Relacionado con productos y manuales para Herramientas Eléctricas Harbor Freight Tools Variable Speed Multifunction Air Tool