Harbor Freight Tools Variable Speed Multifunction Air Tool Manual descargar pdf (Pagina 11)

Page 11For technical questions, please call 1-800-444-3353.SKU 67538

RESULTING IN INJURY:

Do not exceed the tool’s maximum

air pressure rating of 90 PSI.

If the tool still does not have sufcient

force at maximum pressure and

sufcient airow, then a larger tool

may be required.

To prevent accidents, turn off the tool 7.

by releasing the Trigger Lever (41),

detaching the air supply, and safely

discharging any residual air pressure

in the tool after use. Clean external

surfaces of the tool with a clean, dry

cloth. Store the tool indoors out of

children’s reach.

Do not remove the Safety Catch. It 8.

has been included for your safety.

Without it, the tool could activate

when it is bumped against something,

set down on its Trigger Lever, or

picked up while accidently pressing

on the Trigger Lever, activating the

tool.

USER-MAINTENANCE

INSTRUCTIONS

Procedures not specically

explained in this manual

must be performed only by a

qualied technician.

TO PREVENT

SERIOUS INJURY

FROM ACCIDENTAL

OPERATION:

Turn off the tool, detach the

air supply, safely discharge

any residual air pressure in

the tool, and release the

throttle before performing any

inspection, maintenance, or

cleaning procedures.

TO PREVENT SERIOUS

INJURY FROM TOOL

FAILURE:

Do not use damaged

equipment. If abnormal

noise, vibration, or leaking

air occurs, have the problem

corrected before further use.

TO PREVENT EXPLOSION:

Lubricate the tool only

with specied lubricants.

Lubricate the air inlet using

only pneumatic tool oil. Other

lubricants may damage the

mechanism and may be

highly ammable, causing an

explosion.

Cleaning, Maintenance, and

Lubrication

Note: These procedures are in addition to

the regular checks and maintenance

explained as part of the regular

operation of the air-operated tool.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios